News
Home > News > Content
Common Problems And Solutions Of Thermal Paper Slitting Machine
- Oct 21, 2018 -

First, the finished rolls of thermal paper slitting machine is irregular. The main reason is that the paper core is not suitable, as long as the paper core that meets the required inner diameter is replaced, and the winding roller is used in the winding process, the slitting machine can also be prevented from being untidy.

Second, the finished rolls of thermal paper slitting machine getwrinkle. The main reason is that the winding tension is not correct, adjust the appropriate winding tension of the paper slitter, and use the pressure roller to wind up and pack the cutting material over the pressure roller before entering the winding paper core.

Third, the counting of thermal paper slitting machine is not accurate. This kind of problem can be used to contact the feeding roller at the same time with the two wheels of the meter wheel, and make a mark on the meter wheel to hand 5 turns to count 1 meter or replace the meter.