Home > News > Content
Daily Maintenance Of Slitting Machine
- Nov 25, 2018 -

Want our machines to operate normally and have a long service life, daily maintenance and maintenance is essential, today to share with you how the cutting machine is used for daily maintenance!

In addition to the lubrication machine, the inspection and maintenance work that must be done every week is as follows:

1. Check the thickness of the friction plate of the slitting machine brake, and replace them when the wear is severe;

2. Check if the linear guides of the slitting machine are clean and clean them if necessary;

3. Check if the drive belt of the slitter is kept at its proper tension;

4. Check if there is any air leakage on the gas cutting machine.

5. Check the surface of all the rubber rollers of the slitting machine. Never touch the cutting tool to avoid damage to the surface.

6. When the roller is dirty, it can be scrubbed with fine gauze and industrial alcohol, but be careful not to wipe the slitting machine with alcohol. Some old parts have already appeared to avoid rust.