News
Home > News > Content
Ome Suggestions On The Use Of Automatic Slitting Machine
- Mar 08, 2018 -

Automatic Slitter is a wide paper or thin film cut into a narrow range of material machinery and equipment, often used in papermaking machinery and printing and packaging machinery, with smooth running, easy to operate, adaptable to high yield advantages.

In the automatic cutting machine before putting into work, we have to check whether the work bit adjusted properly, need to lubricate the parts, should be in advance lubrication grease, check the knife is sharp. Before the equipment is ready to run, all personnel must notify the departure of the equipment, to ensure that the safety of the operation of the operation, should not touch the running of the film coil or roller core, so as to avoid the hand involved in causing personal injury;

We use automatic cutting machine to ensure that the voltage, current and hydraulic equivalent of the correct and stable before the boot. When everything is normal, you can start empty check if there is any abnormality, and will be processed orders in advance into the computer checklist inspection, equipment into work, should be in accordance with the production situation in time to adjust the best working state of equipment, to ensure that slitting machine indentation is moderate, cut without burrs, both sides trim position appropriate. To ensure that the cross-cutting machine into the paper smooth, cut the length of precision, the joint production management of vertical and horizontal cutting machines, the same need to constantly monitor its operation, beware of blocking paper phenomenon and the emergence of defective products.

After the work is completed, timely cleaning of the equipment on the dust and scraps of paper, knives and grinding wheel for inspection, pai net oil and water separator and gas tank in the water, check the operation of the site has no abnormalities. Then, according to the instructions required to cut off the power supply, maintenance of good computer operating system. In addition, if there is a problem with automatic slitting machine, you must find a professional to carry out maintenance, in the maintenance must be the switch to shut down to avoid security risks.