News
Home > News > Content
Shrinkage Packaging Machine Failures And Solutions
- Jul 28, 2018 -

What should we do if the shrinkable packaging machine encounters a malfunction during use? Here we talk about common faults and solutions.

1. The shrinkable packaging machine is easy to shift during the packaging production and cannot feed normally. This will make the shrinkable packaging machine unable to shrink the package. Therefore, the film roll position and the tension balance bar can be adjusted. Both are invalid and can be solved by adjusting the angle of the upper triangular plate.

2, when the shrinkable packaging machine is in the production of packaging, the heating temperature of the packaging part is slow or can not reach the standard packaging temperature. This problem can cause the packaging to fail to achieve the intended packaging purpose. The heating process depends on the heater. The main power line of the heater should be checked first. The line of the heater is the main power line through a magnetic switch and then to the electric heating tube. Therefore, it is necessary to first check whether the contacts of the magnetic switch are normal.

3. When the multi-objects are bundled, the equipment cannot detect the packaged object, and the packaging causes damage to the packaging, which makes the packaging work impossible. This occurs because the heat shrink packaging machine is in the middle of the object during the bundle packaging. The gap affects the detection of the electric eye, and only needs to adjust the angle of the electric eye detection of the heat shrink packaging machine to an oblique angle to avoid the occurrence of the above phenomenon.