Home > News > Content
The Solution To The Three Major Problems Of Thermal Paper Slitter Rewinder
- Dec 04, 2018 -

First: Thermal paper slitter rewinder products are not well-rolled. Most of this is due to the fact that the paper tube is not suitable, as long as the paper tube that meets the required inner diameter is replaced, and the winding roller is used during the winding process.

Second: The volume of products is starting to take off. This is mainly because the winding tension is not correct, and the winding tension of the thermal paper slitting machine is appropriately adjusted.

Third: The counting of thermal paper slitter rewinder is not accurate. In this case, the two wheels of the meter wheel can be simultaneously contacted with the feeding rubber roller, and a mark on the meter wheel is hand-cranked for 5 times to count 1 meter or the meter is replaced.