News
Home > News > Content
What Are The Precautions For The Installation Of Shrink Packaging Machine
- Jan 22, 2019 -

In the processing of using the shrink packaging machine, you should pay attention to the following  points:


1. The input power of shrink packaging machine must be greater than the nominal power on the shrinking machine nameplate, otherwise it is easy to burn the line or electrical components.


2. The shrink packaging machine must be reliably grounded like a baler to protect personal safety.


3.The machine must be installed horizontally, otherwise it will shorten the service life of the electric heating tube.


4. When the machine is used continuously for more than three months, the temperature-resistant wires of the shrinkage chamber should be inspected and replaced according to the degree of aging.


5. When the machine is working, the palms and other parts of the operator are not allowed to come into contact with the running parts of the machine. In particular, the temperature inside the shrinking chamber is extremely high and it is easy to burn.


6. After the packaging work is finished, the heating switch of the shrink packaging machine should be turned off first, so that the conveying motor and the fan motor continue to run for about 10 minutes, and then the entire power supply is cut off.