News
Home > News > Content
Why Is The Shrinkable Packaging Machine Packaging Film Cut Continuously?
- Jul 30, 2018 -

Recently, some customers have told us why the packaging film of the shrinkable packaging machine has been cut continuously. In fact, there are many reasons for this.

Reason one: This situation is caused by the fact that the temperature of the sealing knife and the sealing time are not adjusted to the values required for the shrink film, as long as the sealing temperature and the sealing are adjusted to appropriate values.

Reason 2: The air pressure does not meet the requirements of the machine. This is also the reason for this situation, so the user must adjust the air pressure to the correct value when starting up.

Cause three: Check whether the upper sealing knife and the lower sealing seat are adjusted to the same horizontal position (including pressure and no pressure), if it is not adjusted to the horizontal position, it should be adjusted to the level.

Reason 4: When sealing, the upper and lower seals will be opened because the lamination plate is connected to the shaft or other parts. Cause the pressure is not tight or in a floating state. When testing the machine, the user should properly position the lamination plate.