Pallet stretch wrapping machine -the turntable doesn't work:
1. The inverter is burned, and the phenomenon is no replacement;
2. The inverter parameters are set incorrectly according to the requirements;
3. The turntable chain is cracked to adjust the spacing between the large sprocket wheels, and the chain is connected. If the chain is damaged, the chain is replaced;
4. The turntable motor itself is faulty. Use a multimeter or a shaker to check whether the motor is missing or broken. If the site cannot be repaired, replace the motor.
5. The turntable reducer itself is replaced by faults;
6. The knob is damaged and the chassis is not rotated (E-type device) replacement;
7. PLC has no output replacement;
8. The turntable reducer and the sprocket are not properly connected to the flat button;
