The knife of the non-woven slitting machine is mounted on a roller, and the screw at one end of the guide roller can be disassembled, and the knife can be disassembled from there. This is the installation of the top knife. There is also the bottom knife, the installation of the bottom knife, you need to calculate the width to be cut, select the corresponding device. The installation of the bottom knife is based on calculating the slit width and the installation is easy.
How to install a non-woven slitter blade:
First confirm that the main motor start button is in the stop state, and confirm that the main motor pulley is at rest, the sharpened blade is mounted on the tool changer, and then the tool changer is pushed together with the blade to the front of the platen. At the position, put the cutting knife selection switch to the right end of the tool change position "", rotate the hanging knife device as described above, raise the blade to the highest position, attach the blade connection screw and tighten, then loosen the cutter on the tool changer 2 handles, after removing the tool changer, install the remaining blade connection screws and tighten.
