After connecting the disposable plastic gloves making machine to the power supply, install the packaging film roll and set the parameters. Turn on the main power switch, start the machine, and let the heat sealing knife heat up to the set temperature. This process usually takes 5-10 minutes. Machine trial run: In manual mode, perform a single cycle operation to check the following steps: whether the film feeding is smooth, whether there is any jamming or deviation, whether the packaging film is perfectly formed into a bag shape in the forming machine, whether the counting and feeding are accurate, whether the sealing is flat and firm, and whether the cutting is clean and neat. After the trial run is successful, switch to automatic mode and the machine will start continuous production. Operators need to monitor on the side, replenish raw materials and packaging films in a timely manner, and randomly inspect the quality of finished products.
After shutting down, clean the dust and oil stains on the surface of the machine with a soft cloth, especially in the heat sealing knife area, to ensure that there is no residual plastic. Regularly lubricate the bearings and other components.
