Precautions For Use Of Cooling Gel Mixer

The cooling gel mixer is simple in structure and easy to operate.
During installation and use, the following points should be noted:
1. The cooling gel mixer shall be placed in a flat place.
2. Before starting, check whether the brake, protective device, wire rope rail, and pulley are in good condition to ensure that the wire rope is installed correctly and the drum is wrapped firmly.
3. When the cooling gel mixer is running, do not put hands or tools into the mixing drum. When the funnel rises, don't put anything below the funnel. After the work is completed, the funnel should be fixed properly. When it is necessary to inspect or clean materials under the hopper, the hopper must be lifted and locked with a chain.