The processing of aluminum foil tray mould formwork is very important
1) The upper and lower plates of the mold frame should be aligned and in the same direction. It is not easy to make mistakes during assembly.
2) A/B plate processing (ie, moving die frame processing): A/B plate processing should ensure the parallelism and verticality of the mold frame.
3) thimble fixed plate processing: the thimble plate and the B plate need to be connected, the B plate faces upward, and the thimble hole is drilled from top to bottom. The thimble countersunk head needs to turn the ejector plate back up, correct, first roughing with a drill bit, and then Finished in place with a milling cutter, chamfered.
The processing of the mold frame must be precise, and it should be aligned during installation. Otherwise, it will easily cause uneven force on the mold and affect the production of the product.
