Tape slitting machine is mainly used to cut large rolls of tape into small roll. we can cut the tape according to any adjustment scale to meet different tape production requirements.
After the tape slitter is put into operation, the best working state of the equipment shall be adjusted timely according to the production situation to ensure that the indentation of the slitter is appropriate, the slitting is free of burrs, and the trimming position on both sides is appropriate.
Equipment shall be cleaned and maintained regularly when it is not in use to ensure that it can be used directly next time. For example, if the transmission chains and gears are short of oil, add grease; Check the lubrication of the reducer, the lubrication of the bushing and shaft on the reel, and regularly check whether the screws of each part are loose. It should be noted that the rubber wheel and reel should not be wiped with corrosive chemicals during the maintenance of the tape slitter.
