The anilox roller is a very important part of the paper roll printing machine. Whether it is a ceramic anilox roller or a metal anilox roller, it is very expensive, so the maintenance, maintenance and inspection of the anilox roller are very important.
Most of the anilox rolls that need to be replaced are due to lack of maintenance and effective inspection methods. The most common ones are dry ink, resin, coating sizing material, etc. that block the mesh, and the dry ink remaining in the mesh. The coating sizing material will occupy the volume of the mesh, resulting in ink transfer and reduced coating volume. Especially for water-based inks, it is difficult to dissolve with fresh ink after drying, and it is difficult to clean thoroughly with chemical solvents. It is used for a long time and the coating volume is large. In addition, the ink is transferred and the coating is uneven, and high-quality can not be obtained. Prints, and accelerate the shortening of the service life of the anilox roller.
