For the slitting machine itself, it can be divided into domestic and imported. In addition, there is no good equipment for slitting machine equipment. The main thing is that the equipment that suits us is better. Of course, for imported ones, its performance will be relatively better, but its cost is also relatively expensive.
For non-woven fabric slitting machine, it is actually mainly used for cutting or slitting wide rolls such as non-woven fabrics. Then, we directly cut the inner diameter of our paper tube to 75mm, the outer diameter of its non-woven fabric is 600mm, and its length is a non-woven fabric of the roll base material within 1600mm. It can cut several rolls of the actual size we need, and if it is narrow, it can also be cut into an 18mm edge strip.
For the non-woven fabric slitting unit, it is actually mainly welded with our thick steel plate, and its welding is relatively firm, and its angle is relatively balanced. In this way, our machine is relatively balanced under high-speed working conditions.
In addition, for the rewinding part of the non-woven fabric slitting unit, it mainly uses a 3-inch air-expanded reel and our magnetic powder tension controller for rewinding. For our slitting and edge-wrapping operation, it is also relatively simple. And for its rewinding diameter, it can also reach 600mm.
In addition, for the non-woven fabric slitting unit, its unwinding actually uses a 3-inch air-expanded unwinding reel, and its unwinding diameter can also reach 600mm. In addition, our non-woven fabric slitting unit is also equipped with a magnetic powder tension controller, as well as many other equipment such as automatic edge alignment devices.
