In the process of producing aluminum foil tray, it is necessary to pay attention to some safety precautions when operating aluminum foil tray molds:
1. Can not be more than one piece of aluminum foil punching at the same time.
2. It is absolutely forbidden to reach into the stamping area of the mold.
3, to avoid one-handed operation, should work with both hands.
4. Use the tool holder to take the finished product and the edge material.
5. Thoughts should be concentrated.
6. Strictly abide by the aluminum foil tray mold operating procedures.
7. The mold should be fixed firmly.
8. Hands and feet should coordinate work at the same time.
9. When there is a problem in the operation of the aluminum foil mold, it should be powered off.
10. Mood, sleep, family, too loose and excessive emphasis on safety and easy to accident.
