1. The automatic bottle filling machine body is made of stainless steel.Do not let it touch any sharp or hard
objects.
2. The cylinder is factory lubricated.Do not open the cylinder for applying lubricant
3. Before washing the machine,clear the residuals in the 13 cylinder and 14 three
direction and then fill the charging basket with a soft detergent.It is suggest to use
warm water.If necessary soap,alcohol or other detergent can be used for washing.
4. It is not allowed to direct flush the machine with body with water
5. No arbitrary air pipe connection is allowed.
6. If the cylinder is ejected and cannot be returned owing to improper operation,press
the reset button on to reset the cylinder.
7. All this wheel on the machine is cleaned and lubricated every week.
8. All the fixing screws on the machine need to be checked regularly. Once the screws
are found to be loose, they must be tightened immediately.
