The causes and solutions for the failure of the heat shrink packaging machine to transport the motor without turning or running the jitter card:
(1) The 24VDC power supply connection of the conveying motor is in poor contact, find out the fastening
(2) Carbon brush wear inside the conveyor motor, replace the carbon brush
(3) Motor and conveyor belt drive shaft drive chain breaks, replace the drive chain
(4) The tension of the conveyor belt is too loose or too tight, and the tension of the conveyor belt is re-adjusted.
(5) The conveyor motor coil is burnt or the reduction gear is damaged, and the same type of conveyor motor is replaced






