Automatic wrapping machine is widely used in the integration of foreign trade export, food and beverage, irrigation, papermaking and other products, and plays the role of dustproof, moisture-proof and cleaning.
The installation and setting method of the automatic wrapping machine is as follows:
1. Put the machine in the position where the wrap packaging machine is to work. The size of the column of the standard machine of the machine is higher than 2200mm, and the non-standard machine should be determined according to the actual situation.
2. Put the motor wire and control wire under the round hole of the chassis, then straighten the main column by hand, then use the key to open the lower cover on the rear side of the main column, and use 4 screws to lock the main column and the equipment chassis. The only thing is, do not press the power cord under the turntable, it is easy to break the power cord.
3. Take out the control wire from the hole, and professional electrical technicians will connect the wire to the power wire. Turn on the power, L is connected to the live wire, N is connected to the neutral wire, and PE is connected to the ground wire.
