The operation process of the rewinding machine is as follows
1. The input voltage is three front wires and one zero wire. Hold the porcelain handle when closing and pulling the switch to avoid electric shock.
2. Use an Allen key every day to check whether the reel screw of the reel is strong and fasten it if it is loose.
3. Adhere to the cleaning of the whole machine, wipe off the oil in time, and clean the wound plastic strips.
4. Threading: The two large rubber shafts on the slitter rewinder cannot be threaded to avoid scratches.
5. Distinguish the side selection of the electric eye, distinguish between manual and automatic. When manual, it can move the unwinding shaft left and right, and switch to manual when shutting down.
6. When slitting, adjust the left and right installation of the unwinding with the handwheel, so that the closing car meets the middle of the two switches.
