The main solutions for the filling volume of bottle filling machine are as follows:
1. When the pump is installed, the pump body and the pump rod are mixed, and the gap of the pump is not matched: the pump body and the pump rod are labeled, and they are not mixed.
2. Installation position of liquid storage tank, liquid separator, ceramic pump and needle holder: Add a buffer device between the buffer tank and the pump.
3. Silicone tube and dispenser and ceramic pump connection: replace the connector or silicone tube
4. The connection between the ceramic pump and the rotary valve knot: replacement connection slip knot
5. Filling speed: reduce the filling speed, change the acceleration and deceleration of the filling pump or replace the silicone tube with wall thickness.
