At present, because the ink produced in China is in the actual application process, the coloring rate is lower than the standard coloring rate index. If we want to achieve the same solid density value in the printing process, then we have to increase the ink volume. Increasing the thickness of the ink, so that the ink is difficult to dry, and the thicker the ink layer, the more easily it is damaged by external force, and the color mixing phenomenon occurs, so the thickness and coloring rate of the ink may also affect the color mixing phenomenon of the offset printing machine.
Especially in the summer, the temperature in the general room is relatively high. When the printing press is running, the printing rubber roller will gradually heat up, and the ink on the printing rubber roller will naturally change, and the viscosity will also increase, which will become more when transferred to the blanket. Serious, it is easy to produce color mixing phenomenon, so in order to not produce color mixing, the ink drying performance should be mastered, especially the early use of ink, then the drying is particularly serious, we must master it.






